John Deere 660R
Loader


  • Tool-free removal and attachment with just a few, simple steps
  • Frame design that allows for maximum maneuverability
  • Automatic Mast Latch system for quick change from loader to three-point implements
  • Repositioned leveling links for better visibility


Request a Demo

John Deere 660R

Loader


  • Tool-free removal and attachment with just a few, simple steps
  • Frame design that allows for maximum maneuverability
  • Automatic Mast Latch system for quick change from loader to three-point implements
  • Repositioned leveling links for better visibility

Request a Demo

Features

Loader Technology package prep
Time and cost savings with Loader Technology package preparation

The loader technology package prep provides the installed harness and controller to further install a hardware bundle that has four key features to make material handling easier and more efficient. The package is only for mid-model year 2022 and newer 6R 110 to 6R 250 Tractors when equipped with the electric joystick and mid- valves.

Technology package hardware unlocks the following loader features when DWS option code is ordered with Loader Technology package prep.

Optional Loader Technology hardware if equipped (code 9661)

  • Dynamic Weighing System (DWS)
  • Level to Horizon (LTH)
  • Return to Position (RTP)
  • Electronic self-leveling (ESL)
Loader Technology when ordered with Loader Technology package prep (code 9661)
#
Return to Position (RTP), if equipped (code 9661)

This feature moves the loader boom and bucket automatically to easily preset positions. The operator can save boom upper height, lower height  and 2 different bucket angles for both settings A and B. With a push, pull, left or right motion of the joystick just past a built in joystick detent to activate, then the loader automatically returns the boom and bucket to the preset position. This feature works great for an upper height to clear wagon and a lower bucket angle set for dumping then  returning bucket back to zero, then lower loader back to a transport position. Re-zeroing implements is easy with a zero soft button on the RTP run page.

Mid-model year 2022 6R Tractor E-ICV joystick Mid-model year 2022 6R Tractor E-ICV joystick

RTP can easily be switched off if manual operation is preferred.

Level to Horizon (LTH), if equipped (code 9661)
#

This feature levels the attachment parallel to the horizon, while conventional loader leveling systems maintain the same angle as the tractor. This means that when operating in hilly conditions, waterways, or in and out of buildings on the farm, the pallet fork, bucket, or other attachment is actively moved into a horizontal position. If this behavior is not desired by the operator, it can be turned off in the tractor display. The attachment is then leveled to the tractor if equipped with a leveling feature such as mechanical self-leveling (MSL). LTH is compatible with both self-leveling and non-self-leveling loaders

Dynamic Weighing System (DWS), if equipped (code 9661)

The DWS feature displays the current weight loaded on the attachment, such as a bucket, spear, or forks. The tractor does not need to stop for weighing, it’s constantly providing a weight reading allowing the operator to fill bucket to the required target weight without interrupting for a separate weighing cycle. Record weight with count as needed with a push of the joystick button.

It also allows the operator to create and save single material groups such as bales, feed, or fertilizer. Also, create and save a material group of up to 6 different materials. Display tracks single material group with section from material dropdown with record of count, minimum, maximum and average weight. The weighing system even registers multiple units. For example, in single material group you can count bales by 1, 2, or 3 with every loading cycle.

Operating the material group from the DWS run page by the selection of different stored material groups. Selecting the material is as easy as selecting one of listed materials and record the weight as you are loading. Weight will be recorded and count down to zero then a green checkmark will appear next to the material signifying that it has been completed, repeat until all materials have been added. A bar diagram and displayed values clearly show how much weight of the current component is still needed to achieve its target weight.

Loader camera option when ordered with Loader Technology package (code 9662)
Tractor showing the loader camera image Tractor showing the loader camera image

The loader camera provides visibility to the loader carrier and surroundings. The hooks of the carrier are visible to facilitate connecting attachments. When working with pallet forks, the fork tips are visible to assist picking up pallets with ease. The video image is shown in the built-in display of the 6R Tractor.

#

DWS is a must for windy feed yards because you can weigh your lightweight commodities in the shed without blowing feed across your yard when feathering over feed wagon getting to a target weight.

Electronic self-leveling (ESL), if equipped (code 9661)

ESL maintains bucket positioning in any range of the boom. It can be easily activated and deactivated from the run pages. Toggling between ESL and LTH is as simple as selecting which leveling operation is needed through the run page on display. ESL is compatible with both self-leveling and non-self-leveling loaders. ESL is compatible with both self-leveling and non-self-leveling loaders.

Benefits
  • Faster and easier loading of goods with RTP
  • No manual controlling of heights and angles to avoid trailers, sheds, etc.
  • Weighing on the go without the time-consuming needing to stop and perform a weighing cycle
  • No time lost returning excessive load from mixer wagons
  • No effort to rewrite the target weight of all individual components when changing silage pits with a different nutrition value or varying herd size
  • No need to purchase a feeder wagon scale
  • Fast filling of target weight in the bucket without interrupting to verify the current weight
  • Less risk of loss of expensive commodities caused by the wind blowing over wagon
    Automatic bale counter versus paper notes in the cab
  • Can weigh liquids and even partial loads on pallets or in containers and buckets
  • Avoid spilling goods or transport multiple bales without dropping them with the LTH feature

The camera is factory-installed in the loader factory; the wiring harness is protected inside the boom. The camera angle can be adjusted if needed. It is possible that a different position of the camera is desired, such as showing the contents of a bucket or the side of a snow blade. For such unique desires, spare cable length is available to enable customized camera positions.

 

Benefits

  • Fast connection of attachments
  • No damage to pallets and goods loaded on forks and spears
  • Possibility for customized camera position
Single-point hydraulic connection to save time
Single-point hydraulic connection on the 600R Loader Single-point hydraulic connection on the 600R Loader
#

The R-Series Loaders feature a single-point hydraulic connection that saves the operator time when attaching or detaching the loader. This feature also incorporates the connection point for any electrical needs as well as the hydraulic lockout valve. With all hydraulic and electrical connections in one location, installation is quickly completed with the pull of a handle.

 

NOTE: Before disconnecting the hydraulic connection between the loader and the tractor, it is necessary to release the hydraulic pressure.

Single-point hydraulic connection (open) Single-point hydraulic connection (open)
Single-point hydraulic connection (closed) Single-point hydraulic connection (closed)

R-Series Loader attach and detach instruction video

Improve appearance and reduce damage with concealed oil lines
600R Loader with concealed oil lines 600R Loader with concealed oil lines
#

The R-Series Loaders are designed to route the oil lines and hydraulic lines through the boom arm and the torque tube. This internal routing ensures better protection of the lines from external damage and improves the overall appearance of the loader.

600R Loader (side view) 600R Loader (side view)
600R Loader (angle view) 600R Loader (angle view)
Easy loader removal and installation using Mast Latching System

New Mast Latch System for the 5R and 6R series loaders makes it easy to attach and detach the loader from the tractor. The system provides easy visual references from both the inside and outside of tractor cab. This feature provides a large pin that is inserted through the mast just above the latching mechanism, providing a quick visual reference from the operator station and during walk around inspections. This pin is attached to the loader with a cable with a convenient storage bracket when the loader is removed. When the loader is attached, the pin provides a sliding handle to assist with alignment and keeping the loader securely attached.

Mast Latch System pin installed in locked position Mast Latch System pin installed in locked position
Mast Latch System pin in stored position Mast Latch System pin in stored position

The inside of the loader mast has a new sticker that is easy to see from cab. This offers an indicator for when latched, to rest over the checkmark and provides a lock symbol just above the pin protrusion. The Mast Latch System is a pin and mechanical lever that allows operators to remove or attach the loader with one trip out of the cab.

Inside of mast shown from operator station Inside of mast shown from operator station

https://johndeeredealers.hosted.panopto.com/Panopto/Pages/Sessions/List.aspx?folderID=cb4ec13e-373e-49ba-84e6-af970138c479

Easy service with boom lockout
Hydraulic shut-off valve on R-Series Loader Hydraulic shut-off valve on R-Series Loader

The R-Series Loaders come equipped with a hydraulic shut-off valve to improve serviceability. When conducting brief service to the loader, close the hydraulic shut-off valve to ensure the loader does not move while operating under the equipment. This feature promotes a safe way to conduct brief maintenance without having to use support stands or removing the loader completely.

Faster cycle time for mechanical self-leveling (MSL) loaders using false rod cylinders -
600R Loader working with 6120M Tractor 600R Loader working with 6120M Tractor
#

The MSL R-Series Loaders utilize a false rod cylinder to improve bucket performance. This bucket cylinder is designed with a smaller displacement of oil required on the head end of the cylinder, which allows the cylinder to function more quickly, decreasing operation cycle time. With the false rod cylinder design, loader applications can work more quickly and efficiently.

False rod cylinders on 600R Loader False rod cylinders on 600R Loader

Specs & Compare

ADD MODEL

Key Specs

660R
Current Model
Maximum lift height (A)4495 mm
177 in.
Lift capacity at full heightMeasured at pivot (U)
2301 kg
5073 lb
Boom breakout forceMeasured at pivot (Y)
3235 kgf
7132 lbf
Bucket rollback force capacityAt ground-level line (ZZ)
4492 kgf
9903 lbf
Clearance at full height - bucket dumped (C)3481 mm
137 in.
Dump angle, degrees (E)60 degree (angle)
Rollback angle, degrees (G)48 degree (angle)

Tractor

Model6145R/M, 6155R/M
Front tire540/65R30
Rear tire650/65R42
Front axle configurationMFWD
Wheelbase2765 mm
108.9 in.
Pump capacity114 L/min
30.1 gpm
Rated pressure200 bar
2900 psi

Loader

Base weight1674.3 kg
Leveling configurationMechanical Self Leveling (MSL)
Bucket usedHeavy-duty grapple 2450 mm
Heavy-duty grapple 96 in.
Bucket weight375 kg
826 lb
Lift capacity at full heightMeasured at pivot (U)
2301 kg
5073 lb
Measured at 800 mm ahead of pivot (V)
2301 kg
5073 lb
Lift capacity at 59 in. (1500 mm)Measured at pivot (W)
2814 kg
6204 lb
Measured at 800 mm ahead of pivot (X)
2645 kg
5831 lb
Boom breakout forceMeasured at pivot (Y)
3235 kgf
7132 lbf
Measured at 800 mm ahead of pivot (Z)
2822 kgf
6221 lbf
Bucket rollback force capacityAt maximum height (VV)
2916 kgf
6429 lbf
At 59-in. (1500-mm) lift height (XX)
4587 kgf
10113 lbf
At ground-level line (ZZ)
4492 kgf
9903 lbf
DimensionsMaximum lift height (A)
4495 mm
177 in.
At full height - bucket level(B)
4255 mm
168 in.
At full height - bucket dumped (C)
3481 mm
137 in.
Overall length (I+F), ft (m)5.6 m
18.4 ft
Overall height in carry position (J)
Digging depth (H)81 mm
3 in.
ReachAt maximum height (D)
1038 mm
41 in.
At ground level - bucket level (F)
2848 mm
112 in.
Bucket angleDump angle, degrees (E)
60 degree (angle)
Rollback angle, degrees (G)
48 degree (angle)
Dump angle, ground
118 degree (angle)
Cycle timesLoader raise, seconds
3.91 seconds
Loader lower, seconds
2.7 seconds
Bucket dump, seconds
1.81 seconds
Bucket rollback, seconds
1.81 seconds

Additional information

Offers & Discounts

No current offers.

Accessories & Attachments



Buckets

2150-mm (85-in.) global heavy-duty bucket with grapple brackets - BW15918
Heavy-duty bucket with grapple Heavy-duty bucket with grapple
#
2150-mm (85-in.) global high-volume bucket - BW16006

The high-volume bucket is intended for use with lighter-density high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.

2150-mm (85-in.) global materials bucket - BW15936
Materials bucket Materials bucket
#

Materials buckets may be used for loading dirt, gravel, feed, and light materials as well as scraping, digging, and other general-purpose task

 

NOTE: Materials buckets are not compatible with replaceable cutting edges or digging teeth.

Miscellaneous

2 Function Single Point Hydraulic Connection - BXX10010
Single-point hydraulic connection on the 600R Loader Single-point hydraulic connection on the 600R Loader
#

The R-Series Loaders feature a single-point hydraulic connection that saves the operator time when attaching or detaching the loader. This feature also incorporates the connection point for any electrical needs as well as the hydraulic lockout valve. With all hydraulic and electrical connections in one location, installation is quickly completed with the pull of a handle.

 

NOTE: Before disconnecting the hydraulic connection between the loader and the tractor, it is necessary to release the hydraulic pressure.

2-Function, Single Point Coupler, Loader Half, Loader Ready - BXX10014
2450-mm (96-in.) global heavy-duty bucket with grapple brackets - BW15919
Heavy-duty bucket with grapple Heavy-duty bucket with grapple
#
2450-mm (96-in.) global high-volume bucket - BW16005

The high-volume bucket is intended for use with lighter-density high-volume materials. The bucket capacity makes this an effective tool for handling snow, wood shavings, and other loose materials.

2450-mm (96-in.) replaceable bucket cutting edge with hardware - BW14269
Replaceable wear edge Replaceable wear edge
#

For those who frequently scrape on concrete, a replaceable cutting edge will greatly extend the life of the bucket:

  • 1850-mm (73-in.) width replaceable cutting edge
  • 2150-mm (85-in.) width replaceable cutting edge
  • 2450-mm (96-in.) width replaceable cutting edge
  • 2750-mm (108-in.) width replaceable cutting edge
3 Function Single Point Hydraulic Connection - BXX10009
Single-point hydraulic connection on the 600R Loader Single-point hydraulic connection on the 600R Loader
#

The R-Series Loaders feature a single-point hydraulic connection that saves the operator time when attaching or detaching the loader. This feature also incorporates the connection point for any electrical needs as well as the hydraulic lockout valve. With all hydraulic and electrical connections in one location, installation is quickly completed with the pull of a handle.

 

NOTE: Before disconnecting the hydraulic connection between the loader and the tractor, it is necessary to release the hydraulic pressure.

3 Function Single Point Hydraulic Connection, Loader Half - BXX10013
Hood Guard - AXX10012
Hood guard on 6155M Tractor Hood guard on 6155M Tractor
Hood guard on 6155M (side view) Hood guard on 6155M (side view)

The hood guard's basic function is to:

  • Help rotect the tractor grille and hood from falling debris or stationary objects
  • Allow for lighting at night

Compatibility:

  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • Cannot be used with a front hitch

 

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight bracket. This is so the front weight bracket is the first point of contact against lower stationary objects. The height of the hood guard allows better protection for the top of the hood and allows operators to see the top of the hood guard.

Hoses and Parts (2 Function) - BW16806

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

Hoses and Parts (2 Function) - BW16855

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

Hoses and Parts (2 Function) - BW16857

The loader hoses are connected to the mid-tractor selective control valves (SCVs).

Hoses and Parts (3 Function) - BW16856
Hoses and Parts (3 Function) - BW16858
Hoses and Parts (3rd Function) - BW16869
Large ballast box - BW15852
#
#

Large ballast box is available to carry additional ballast for greater tractor stability.

 

Capacities

Weight

Sand (Dry)

Concrete

Portland Cement

BW15852 Large ballast box:

Volume

13.3 ft3 = 377L

Material

581 kg (1277 lb)

871 kg (1915 lb)

1089 kg (2395 lb)

Empty box

155 kg (342 lb)

155 kg (342 lb)

155 kg (342 lb)

Total

736 kg (1619 lb)

1026 kg (2257 lb)

1244 kg (2737 lb)


BW15852 Large ballast box is compatible with Category 2 Quik-Couplers and Category 2 or 3 hitches.

See ''Rear Ballast Requirements'' for proper ballasting of the tractor.

Mid-mounted independent control valve (2-function) - BW15985
Mid-mounted independent control valve (3-function) - BW15986
Mounting Frame - BW16827
Power Beyond spacer - BW15989
Single-lever control and mounting parts (2 or 3-function) - BW15744
Single-lever control and mounting parts 3-function with Global Strategic Supplier (GSS) - BW15785
Tool Box Bracket - BW16889

Videos



WE'RE HERE TO HELP.

  • CHECK our videos below. Looking for something else?
  • DROP us a line for all inquiries. >>>