John Deere 512
Loader


  • Parking stands and couplers
  • Hydraulic hose and fittings
  • Quick-change attachment carrier
  • Nitro-carbonized (nitrite or black) cylinder rods



John Deere 512

Loader


  • Parking stands and couplers
  • Hydraulic hose and fittings
  • Quick-change attachment carrier
  • Nitro-carbonized (nitrite or black) cylinder rods


Features

Specs & Compare

ADD MODEL

Key Specs

512
Current Model
Maximum lift height (A)2850 mm
112 in.
Lift capacity at full heightMeasured at pivot (U)
1000 kg
2200 lb
Boom breakout forceMeasured at pivot (Y)
2019 kg
4451 lb
Bucket rollback force capacityAt ground-level line (ZZ)
1410 kgf
3109 lbf
Clearance at full height - bucket dumped (C)2140 mm
84 in.
Dump angle, degrees (E)43 degree (angle)
Rollback angle, degrees (G)30 degree (angle)

Tractor

Model5E Series 2WD Tractor
Front tire7.5-16 6 PR R1
Rear tire13.6-28 6 PR R1
Front axle configuration
Wheelbase
Pump capacity11.4 gpm
Rated pressure2828 psi

Loader

Base weight280.53 kg
618.46 lb
Leveling configuration
Bucket used1850 mm
73 in.
Bucket weight159 kg
351 lb
Lift capacity at full heightMeasured at pivot (U)
1000 kg
2200 lb
Measured at 800 mm ahead of pivot (V)
682 kg
1500 lb
Lift capacity at 59 in. (1500 mm)Measured at pivot (W)
1380 kg
3043 lb
Measured at 800 mm ahead of pivot (X)
980 kg
2161 lb
Boom breakout forceMeasured at pivot (Y)
2019 kg
4451 lb
Measured at 800 mm ahead of pivot (Z)
1335 kg
2944 lb
Bucket rollback force capacityAt maximum height (VV)
979 kgf
2158 lbf
At ground-level line (ZZ)
1410 kgf
3109 lbf
DimensionsMaximum lift height (A)
2850 mm
112 in.
At full height - bucket level(B)
2605 mm
102.5 in.
At full height - bucket dumped (C)
2140 mm
84 in.
Overall length (I+F), ft (m)3.79 m
12.416 ft
Overall height in carry position (J)1.442 m
4.75 ft
Digging depth (H)180 mm
7 in.
ReachAt maximum height (D)
615 mm
24 in.
At ground level - bucket level (F)
1730 mm
68 in.
Bucket angleDump angle, degrees (E)
43 degree (angle)
Rollback angle, degrees (G)
30 degree (angle)
Cycle times

Additional information

Offers & Discounts

No current offers.

Accessories & Attachments



Hood Guards

Brush guard - BW15683
Brush guard Brush guard

The brush guard is designed for operators who require added protection against debris from damaging the expensive-to-replace front grille or lights.

 

NOTE: Not compatible with front hitch.

Hood Guard - BXX10026
Hood guard on 5E Tractor Hood guard on 5E Tractor

The basic functions of the hood guard are:

  • Help protect the tractor's grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
  • Allow for lighting at night
  • Typically can be used with or without the tractor's front weight bracket but not with the actual front weights while using the loader
  • Cannot be used with a front hitch

It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.

Hood guard - BW13780
Hood guard on 5303 Tractor Hood guard on 5303 Tractor
#

The hood guard is highly recommended for 5103, 5203, 5303, 5105, 5205, 5200, 5210, 5220, 5300, 5400, 5400N, 5403, 5310, 5310N, 5320, and 5320N Tractors. The basic function is to:

  • Help protect the tractor grille and hood from falling debris or stationary objects such as a wagon or mixer
  • Allow for lighting at night
  • Can be used with or without the tractor front weight bracket but not with the actual front weights while using the loader (this would overload the front axle)
  • Cannot be used with a front hitch

It is highly recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so the front weight is the first point of contact against lower stationary objects.

Hood guard - BW15817
Hood guard on 5E Tractor Hood guard on 5E Tractor

The basic functions of the hood guard are:

  • Help protect the tractor's grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
  • Allow for lighting at night
  • Typically can be used with or without the tractor's front weight bracket but not with the actual front weights while using the loader
  • Cannot be used with a front hitch

It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.

Hood guard - BW16327
Hood guard on 5E Tractor Hood guard on 5E Tractor

The basic functions of the hood guard are:

  • Help protect the tractor's grille and hood from falling debris or stationary objects, such as a wagon or mixer, while loading
  • Allow for lighting at night
  • Typically can be used with or without the tractor's front weight bracket but not with the actual front weights while using the loader
  • Cannot be used with a front hitch

It is recommended to purchase a front weight bracket when using a loader. The hood guard is designed to be slightly rearward of the front weight. This is so that the front weight is the first point of contact against lower stationary objects.

Miscellaneous

1680-mm (66-in.) general purpose bucket - BW15566

General Purpose (GP) buckets:

  • The 66-in. GP buckets have replaced the 61-in. materials buckets
  • The 66-in. GP bucket will cover wheel tracks where the 61 in. would not on smaller utility tractors
  • Not compatible with grapples
  • The GP buckets are more durable than materials buckets with full length side cutting edges, additional bottom skid plates, and a double reinforced top section
  • Holes are drilled in the cutting edge allowing easy attaching of a reversible and replaceable cutting edge
1850-mm (73-in.) general purpose bucket - BW15573

General purpose (GP) buckets

  • The GP buckets have replaced the 61-in. and 73-in. materials buckets
  • Recommended for use on 2WD tractors only
  • Compatible with digging teeth and replaceable cutting edge
  • The 66-in. GP bucket will cover wheel tracks where the 61 in. would not
  • Not compatible with grapples
  • The GP buckets are more durable than materials buckets with full-length side cutting edges, additional bottom skid plates, and a double reinforced top section
  • Holes are drilled in the cutting edge allowing easy attaching of a reversible and replaceable cutting edge
2-Function Hoses and Parts - BW16736
2-function hoses and parts for tractors with mid-mounted selective control valve (SCV) factory installed - BW15281
2-function single-lever independent loader valve, hoses and Power Beyond connection - BW15758
Two-function single-lever Two-function single-lever
2-function single-lever independent loader valve, hoses and Power Beyond kit - BW15306
Two-function single-lever Two-function single-lever
Large ballast box - BW15852
#
#

Large ballast box is available to carry additional ballast for greater tractor stability.

 

Capacities

Weight

Sand (Dry)

Concrete

Portland Cement

BW15852 Large ballast box:

Volume

13.3 ft3 = 377L

Material

581 kg (1277 lb)

871 kg (1915 lb)

1089 kg (2395 lb)

Empty box

155 kg (342 lb)

155 kg (342 lb)

155 kg (342 lb)

Total

736 kg (1619 lb)

1026 kg (2257 lb)

1244 kg (2737 lb)


BW15852 Large ballast box is compatible with Category 2 Quik-Couplers and Category 2 or 3 hitches.

See ''Rear Ballast Requirements'' for proper ballasting of the tractor.

Parking stands and couplers - BW15502
Parking stand Parking stand
Parking stand coupler Parking stand coupler

For parking the 512 Loader.

 

To see instructions on how to park the loader using the stands, go to parking stand section.

Two function single lever independent loader valve and hoses - BW15756
Two-function single-lever Two-function single-lever
Wire Form Hose Support - BW16980

Videos



WE'RE HERE TO HELP.

  • CHECK our videos below. Looking for something else?
  • DROP us a line for all inquiries. >>>