×
Quick Used Equipment Filter












used search tag

See All Locations

XUV825M S4 UTILITY VEHICLE

Crossover Utility Vehicle

  • Multi-passenger capability for four people
  • Easier shifting, with integrated park position
  • Electronic switch for instant 4WD engagement
  • Improved power steering for smoother operation
Starting At:$17,699.00
Test Drive


View Product Brochure



Features



The Gator™ XUV Crossover Series Utility Vehicle has a precision-engineered drivetrain system that fully utilizes engine power, optimizing acceleration, hauling, towing, and hill-climbing capabilities. Power is transmitted from the engine through a continuously variable clutch system to the transaxle.

Key elements of the drive system include:

Variable-speed drive
Variable-speed drive Variable-speed drive

The variable-speed drive consists of two clutches and a drive belt:

  • Drive clutch is attached to the engine.
  • Driven clutch is attached to the transaxle.

Features include:

  • The engine braking system utilizes a tight belt for operation, requiring an idler sleeve on the primary clutch for neutral. The secondary clutch is a build- on-shaft design that utilizes a cam to tune the acceleration and deceleration of the vehicle. The clutch stays engaged, providing deceleration until approximately 5 km/h (3 mph).
  • The continuously variable transmission (CVT) air intake draws in cool air to reduce heat and the amount of water ingestion into the CVT system. The system reduces belt slippage and improve durability.
  • A two-range transmission provides:
    • Ability to maneuver in tight spaces and increased pulling torque in low range
    • Faster speeds and reduced transport time in high range
  • Standard full-clutch enclosure with high-speed fan provides longer belt and clutch life
  • High-ratio clutches with three cam weights for maximum belt-clamp load in high torque conditions


How the variable-speed drive works:

  1. As engine speed increases, the spring-loaded drive clutch is closed by weights being forced out by centrifugal force.
  2. As the drive clutch closes, the belt rides up to the largest diameter of the drive clutch and forces open the driven clutch.
  3. With the belt running in the smallest diameter of the driven clutch, the speed being transferred to the transaxle is increased.
  4. The driven clutch is designed to sense varying loads (inclines, mud, etc.) and constantly adjusts drive speed upward or downward so that engine rpm remains optimal.
Transaxle, four-wheel drive (4WD), and constant velocity (CV) shafts
Side view of CVT intake and clutch enclosure (XUV835M shown) Side view of CVT intake and clutch enclosure (XUV835M shown)
Differential lock and 4WD switches Differential lock and 4WD switches
Rear view of transaxle, suspension components, and CV shafts (XUV865M shown) Rear view of transaxle, suspension components, and CV shafts (XUV865M shown)
CV boot protection CV boot protection

Operator interface features:

  • Selectable 4WD system with a limited slip front differential and dash-mounted electronic rocker switch
    • Provides exceptional traction in challenging conditions
    • Near instantaneous torque to the front wheels once rocker switch is engaged
    • Maintains turf-friendly operation in two-wheel drive (2WD) mode
    • Combined with rear traction assist (differential lock), provides excellent traction in challenging conditions
    • More control descending hills with 4WD engaged as all four wheels help slow the vehicle down
      • Clutch engagement still necessary to prevent free coasting

Transaxle features:

  • Low, high, neutral, reverse, and park transaxle
  • Automotive-style, integrated park position in transmission
  • Low range for maximum torque delivered to the wheels for hauling, pushing, and pulling
  • High range for maximum vehicle speed
  • To shift out of park, service brake must be pressed to release the parking solenoid. An audible click will be heard and allows the vehicle to shift out of park into the desired gear.

NOTE: Differential design reduces scuffing of the turf during turns because it allows the inside wheels to turn slower than the outside wheels.

  • Start in gear, neutral, or park position for quick starting. The service brake must be engaged to start when in gear or neutral.
  • For operators living in regions with homologation requirements or certain bid language stating the need for a secondary park brake, such as governmental or municipalities, a secondary park brake is available as a factory-installed option. A secondary brake attachment is not available for field installation.
  • Large, sealed bearings are located inside the housing for better protection and durability
  • Contains gear case for transferring power to the 4WD
  • Splined shaft interfaces for maximum torque transfer and durability
  • All drive gears machined from highest grade gear steel
  • Protected by a skid plate

4WD features:

  • Electronically selectable by the operator
    • Offers limited slip functionality for precision steering and great traction while pointing and shooting out of a corner.
  • Vertically oriented oil drain for easy maintenance
  • Protected by a steel skid plate and frame

Drive shaft features:

  • Rear CV shaft diameter measures 27 mm (1.1 in.) and is designed for peak engine and braking torque
  • Front CV shaft diameter measures 23 mm (0.91 in.) and is designed for peak engine torque
  • Propshaft is designed for peak engine torque
  • All CV shaft and propshaft joints are maintenance free and protected by exclusive thermoplastic elastomer (TPE) boots for durability
812-cc (49.6-cu in.) gasoline engine 812-cc (49.6-cu in.) gasoline engine

The machine is powered by an 812-cc (49.6-cu in.), 3-cylinder, dual overhead cams, liquid-cooled, four-cycle gasoline engine. It produces 6.5 kgm (47 lb-ft) of torque at 3200 rpm. The advanced electronic controls and fuel-injection system deliver superb starting, idling, and throttle response during operation.

The engine offers the following performance and reliability features:

  • 38.8 kW (52 hp*) at 6000 rpm
  • Electronic fuel injection for superb performance, altitude adjustment, and cold-weather starting (tested to -28.9°C [-20°F])
  • Electronic ignition is continuously variable for optimum engine power and provides fast, reliable starts
  • Overhead valve design provides greater efficiency and fuel economy
  • Full-pressure lubrication system
  • Spin-on oil filter with drain bracket and oil drain plug enable easy servicing
  • Dry, replaceable, single-element air cleaner
  • See-through coolant recovery tank permits the operator to check the coolant level without having to remove the radiator cap
    • Open radiator compartment for air flow
  • Standard high-capacity alternator - 85 amps for maximum accessory capability

* The engine horsepower information is provided by the engine manufacturer to be used for comparison purposes only. The actual operating horsepower will be less.

XUV front suspension detail XUV front suspension detail

To complement the most capable frame available in a high-performance utility vehicle, the XUV is equipped with four-wheel independent suspension.

A dual A-arm front and rear suspension provides a smooth ride over challenging terrain and excellent hauling characteristics.

The entire suspension system has been optimized to handle no cargo to maximum cargo without compromising ride quality or vehicle stability.

Dual A-arm front suspension features include:
  • 203 mm (8 in.) of travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction and vehicle control
  • 17.5-mm (0.6875-in.) solid anti-roll bar with fully rubber isolated connecting links and pivots for minimal vehicle body roll and quiet operation
  • Heavy-duty, nodular cast-iron knuckles to support the strut, constant-velocity (CV) shaft, and wheel
  • Maintenance-free rubber torsional A-arm pivots for long life and quiet operation
  • CV shaft protection from sticks that may puncture the rubber boot
XUV rear suspension detail XUV rear suspension detail

Dual A-arm independent rear suspension features include:

  • Unequal length, dual A-arm construction for superior wheel control and travel
  • 229 mm (9 in.) of total travel provides ample compression and wheel extension, which keep all four wheels on the ground for superior traction, excellent ride quality, and vehicle control
  • Coil-over shocks absorb the most demanding terrain
  • A-arms made from square/rectangular tubing reduce weight while remaining rigid
  • Heavy-duty, nodular cast-iron uprights support wheel loads with a double row of ball bearings
  • CV driveshaft protection from sticks that may puncture the rubber boot
  • Rear sway bar for lateral stability
Deluxe cargo box with optional brake lights, taillights, and light protectors Deluxe cargo box with optional brake lights, taillights, and light protectors
Top view of deluxe cargo box with optional spray-in liner Top view of deluxe cargo box with optional spray-in liner

The deluxe cargo box consists of a 15 percent glass-filled polypropylene composite material that eliminates rust and dents and reduces noise.

Deluxe cargo box tailgate
Tailgate handle Tailgate handle
Tailgate open Tailgate open
Tailgate lowered to 150 degrees Tailgate lowered to 150 degrees

The tailgate can be opened or removed for easier cleanout and to carry longer items. The tailgate features truck-like performance and can be operated with one hand.

 

The standard-installed lanyards can also be removed to lower the tailgate to 150 degrees for convenient loading and unloading tasks.

Deluxe cargo box tilt
Integrated handle for manual cargo box tilt Integrated handle for manual cargo box tilt

The deluxe cargo box is easier to latch, unlatch, raise, and lower with the integrated handle design and gas assist.

A prop rod is provided to hold the box in the upright position for operator convenience, as well as limit box pivot travel.

Integrated tie-down points
Integrated tie-down point in cargo-box bed Integrated tie-down point in cargo-box bed
Additional tie-down points (TH 6X4 shown) Additional tie-down points (TH 6X4 shown)

The deluxe cargo box offers integrated tie-down points for increased versatility. Tie-down points are located in the following areas:

  • Four corners inside the cargo box bed
  • Four points on the load guard directly behind the operator station (A)
  • Tie-down bars on either side of the cargo box (B)
  • Six points on the underside of the cargo box frame (circled)
Converting deluxe cargo box to a flatbed
XUV835M Cab shown XUV835M Cab shown
XUV835M Cab shown XUV835M Cab shown

The deluxe cargo box easily converts to a flat bed. The flatbed configuration allows loading larger cargo.

Optional accessories
Brake light and taillight with optional protector Brake light and taillight with optional protector
Cargo bed mat Cargo bed mat
Specifications
 Length  1143 mm (45 in.)
 Width  1320 mm (52 in.)
 Depth  305 mm (12 in.)
 Volume  0.46 m3 (16.4 cu ft)
 Weight capacity  454 kg (1000 lb)
 Dump angle  47 degrees

CAUTION: Carrying extra-long cargo that extends beyond the box can adversely affect stability.

Cargo box power lift Cargo box power lift

Optional accessories for the deluxe cargo box include:

  • Factory-installed brake lights and taillights
  • Taillight protectors
  • Factory-installed spray-in liner that improves skid resistance and surface abrasion protection
  • Cargo box bed mat to protect the steel floor from dents
  • Factory-installed cargo box power lift

This Gator™ XUV Crossover Utility Vehicle is equipped with power steering and a dual A-arm front suspension. These automotive-type systems exhibit excellent handling characteristics, as well as responsive steering and low steering effort:

  • Steel ball bearings secure the steering shaft and deliver smooth, responsive operation
  • Completely sealed rack-and-pinion for long life
  • Low steering ratio (lock-to-lock) provides more responsive steering and less operator input
  • Shaft U-joints are phased for a smooth, uninterrupted motion of the steering wheel
  • Tilt steering wheel with 15 degrees of travel (XUV835M, XUV835R, XUV865M, and XUV865R models only; S4 models do not have tilt steering)
Electric power-assist steering system Electric power-assist steering system

Electric power-assist steering (EPAS) system has advanced features:

  • Anti-kickback feature reduces the amount of steering unwinding when traversing difficult terrain.
  • The system is speed sensing and adjusts steering effort as the speed of the vehicle changes.
    • As speed increases, there is less steering assist for improved road feel.
    • As speed decreases, steering assist increases to give lower steering efforts for improved maneuverability.
  • A warning/functional light on the instrument panel provides self-diagnostics and a warning light in the situation of no assist.
  • Torque sensor measures steering wheel input so the on-board computer can provide the appropriate output for various driving situations.

With the EPAS system, the operator maintains a direct, mechanical linkage from the steering wheel to the front wheels. The power-steering system interfaces mechanically with the steering system by being inserted between the steering wheel and the rack-and-pinion assembly.

A differential torque sensor is integrated into the power steering assembly. The circuit board assembly is also integral with the power-steering assembly.

Power steering does not reduce turning radius but significantly reduces steering effort by approximately 85 percent compared to those models without power steering.

EPAS interface diagram
EPAS interface diagram EPAS interface diagram

The numbered descriptions refer to the EPAS interface diagram shown above:

  1. Torque sensor
  2. Electronic control unit (ECU)
  3. Fail-safe relay
  4. Current/thermal control circuit
  5. Reduction gears
  6. DC motor
  7. Rack and pinion
  8. Function/warning light
  9. Key power and ground
  10. Vehicle speed sensor
  11. Instrument cluster
  12. Relay module
Seating for four Seating for four

The XUV825M S4 and XUV855M S4 models feature seating for four. The rear seat converts to provide a flat surface for extra payload and there is sealed under-seat rear storage for additional cargo.

Rear seat down Rear seat down
Storage for additional cargo under rear seat Storage for additional cargo under rear seat

Specifications


Key Specs xuv825m-s4-utility-vehicle
Current Model
Engine power39* kW
52 hp
Cargo box dimensions1143 x 304.8 x 1320 mm
45 x 12 x 52 in.
Cargo box capacity (weight)454 kg
1000 lb
Towing capacity680 kg
1500 lb
Front suspensionFully independent dual A-arm with adjustable coils; 203 mm (8 in.) of travel
Rear suspensionFully independent dual A-arm with adjustable coils and sway bar; 228.6 mm (9 in.) of travel
Final drivePark, high, low, neutral, reverse transaxle
Four wheel driveDash switch actuated four-wheel drive system with limited slip front differential plus locking rear differential
Fuel capacity27.6 L
7.3 U.S. gal.
Engine
Type4-cycle gas, electronic fuel injection (EFI)
Displacement812 cc
Power39* kW
52 hp
Cooling systemLiquid
Drivetrain
TransmissionContinuously Variable Transmission (CVT) with clutch enclosure
Final drivePark, high, low, neutral, reverse transaxle
Four wheel driveDash switch actuated four-wheel drive system with limited slip front differential, plus locking rear differential
Traction assistPositive locking, switch actuated rear differential lock
Descent controlYes
Suspension
FrontFully independent dual A-arm with adjustable coils; 203 mm (8 in.) of travel
RearFully independent dual A-arm with adjustable coils and sway bar; 228.6 mm (9 in.) of travel
Brakes
TypeFront/rear hydraulic disc with twin piston front calipers
Park brakeOptional factory installed secondary, hand operated
Tires / Wheels
Front27x9-R14 Maxxis® Bighorn® extreme terrain radials on steel or alloy wheels
27x9-R14 Predator Heavy-Duty all-terrain radials on steel or alloy wheels
Rear27x11-R14 Maxxis Bighorn extreme terrain radials on steel or alloy wheels
27x11-R14 Predator Heavy-Duty all-terrain radials on steel or alloy wheels
Dimensions / Capacities
Wheelbase2895.6 mm
114 in.
WeightWith fuel and fluids: 953 kg
2101 lb
Length3921 mm
154 in.
Width1574 mm
62 in.
Height1903 mm
75 in.
Tread centers1305 mm
51.4 in.
Ground clearance280 mm
11 in.
Fuel capacity27.6 L
7.3 U.S. gal.
Cargo box dimensions1143 x 304.8 x 1320 mm
45 x 12 x 52 in.
Cargo box capacity (weight)454 kg
1000 lb
Payload capacity592 kg
1305 lb
Towing capacity680 kg
1500 lb
HitchStandard receiver: 5.1 cm
2 in.
Features
ColorGreen and yellow, camouflage, olive and black
Power steeringYes
Battery / Alternator / Power port480 CCA
At 6000 rpm, regulated: 85 amp
1020 W
InstrumentationDigital display (gear position, system diagnostic light, speed, rpm, 4WD indicator, rear differential indicator, fuel level, coolant temperature, hour meter, miles, and service interval warning light)
StorageTwo cup holders, under hood, glove box, under rear seat
SeatingFront and rear bench

Offers and Discounts

Studio image of XUV 835r

No Interest if Paid in Full within 12 Months1

on New Gator Utility Vehicles

  • No Interest if Paid in Full within 12 Months1
  • Offer available 03 May 2022 through 02 August 2022
Studio image of XUV 835E Gator

0% fixed rate for 36 months1,2

on New Gator XUV or HPX Utility Vehicles

  • 0% fixed rate for 36 months1,2 OR
  • 1.9% fixed rate for 48 months3,4
  • Offers available 03 May 2022 through 02 August 2022

1Offer valid on qualifying purchases made between 03 May 2022 to 02 August 2022. This offer excludes TX Turf Gators™ and ProGators. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. Interest will be charged to your account from the purchase date at 17.9% APR if the purchase balance is not paid in full within 12 months or if your account is otherwise in default. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

1Offer valid on qualifying purchases made between 03 May 2022 to 02 August 2022. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. 0% APR is for 36 months only, regular Revolving Plan rates will apply after that. The regular Revolving Plan rate, which varies over time, is currently 18.5% APR. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

2Offer valid on qualifying purchases made between 03 May 2022 to 02 August 2022. Subject to approved installment credit with John Deere Financial, for consumer and Ag use only. Down payment may be required. Average down payment is 10%. $20.83 per month for every $1,000 financed. 0% APR for 36 months only. Taxes, freight, setup, insurance, fees, and delivery charges could increase monthly payment. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

3Offer valid on qualifying purchases made between 03 May 2022 to 02 August 2022. Subject to approved credit on a Revolving Plan account, a service of John Deere Financial, f.s.b. For consumer use only. No down payment required. 1.9% APR is for 48 months only, regular Revolving Plan rates will apply after that. The regular Revolving Plan rate, which varies over time, is currently 18.5% APR. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.

4Offer valid on qualifying purchases made between 03 May 2022 to 02 August 2022. Subject to approved installment credit with John Deere Financial, for consumer and Ag use only. Down payment may be required. Average down payment is 10%. $17.48 per month for every $1,000 financed. 1.9% APR for 48 months only. Taxes, freight, setup, insurance, fees, and delivery charges could increase monthly payment. Available at participating U.S. dealers. Prices and models may vary by dealer. Offer available on new equipment and in the U.S. only. Prices and savings in U.S. dollars.