John Deere 2025R
Compact Tractor
- Standard LED headlights and fender lights
- Hydro transmission with TwinTouch™ pedals for ease of use
- AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes
View Special Offers
John Deere 2025R
Compact Tractor
- Standard LED headlights and fender lights
- Hydro transmission with TwinTouch™ pedals for ease of use
- AutoConnect™ mid-mower deck can be installed or removed in less than 5 minutes
Features
Engine
- Updated isolated Yanmar® TNV Clean & Silent Diesel Engine
- Meets Tier 4-emission standards
- Engine features lower levels of exhaust and emissions
- Isolated engine for quieter operation
- 24.2 gross hp* - 18 PTO hp* (5.8 percent increase in PTO hp over the 4110 Tractor)
* As per 97/68/EC ISO @ rated speed.
Powertrain
- Standard HST transmission with Twin Touch™ foot pedals
- Allows for increased performance
- Larger tires
Hydraulics
-
Standard dual mid-selective control valve with integrated loader joystick
-
Two options for raising and lowering the mid-mount mower deck
-
Standard mechanical lift system—uses 3-point hitch to raise and lower mower deck
-
Optional independent lift kit—uses tractor hydraulics to raise and lower mid-mount mower deck, providing the ultimate in versatility and flexibility
-
Operator station and controls
- Ag tractor family styling
- One-piece hood design
- Updated instrument panel, dash, and throttle design
- Molded foot deck
- Standard folding rollover protective structure (ROPS)
- Standard mid rockshaft with mower deck height adjustment
Implements
-
H130 Loaders
-
Commonality of loaders and rear implements between 2025R and 2032R
-
Updated drive-over deck with the stow-and-go feature
Standard equipment for the 2025R Tractor
- Folding ROPS
- Dual mid-selective control valve with integrated loader joystick control
- Power steering
- Four-wheel drive
- Mid PTO
- Wet-disk brakes
- Cruise control
Yanmar is a U.S.-registered trademark of Yanmar Company Limited.
Power is provided by a durable and efficient high-torque 3-cylinder Yanmar TNV Series diesel engine.
Model |
Number of |
Engine |
Gross |
PTO hp* |
2025R HST |
3 |
68.0 (1.267 L) |
24.2 |
18.0 |
2032R HST |
3 |
100 (1.642 L) |
31.7 |
23.5 |
This series of engines was developed to meet environmental requirements for Tier 4 (2025R) emission requirements by featuring lower levels of both exhaust and emissions.
* As per 97/68/EC ISO at rated speed.
Yanmar TNV Series engine offers these features:
- Economical cast-in block cylinder design for good cooling and long life
- Indirect fuel injection on the 2025R uses a pre-combustion chamber to give the engine a smooth and quiet operation
- Direct fuel injection on the 2032R injects fuel on top of the pistons and allows for more efficient combustion and fuel economy
- Aluminum alloy piston with built-in steel struts are lightweight to reduce connection rod bearing loads and provide good heat transfer characteristics
- Design permits tighter tolerances and neutralizes expansion of the piston, thereby reducing blow-by gas and generating less noise from the piston slap
- Higher top rings on the piston and a thinner head gasket greatly reduces the volume of unburned waste gases and increases combustion efficiency
- Timing gear teeth have a roll-off profile giving almost no clash, no noise, and no backlash
- Special flywheel flange seals flywheel air turbulence noise inside the flywheel housing
- High-torque reserve provides plenty of power under heavy load yet retains excellent fuel economy
- Fuel filter with replaceable element
- Full-pressure lubrication system provides filtered oil under pressure to all vital engine parts
- Glow plugs on the 2025R provide quick starts in temperatures down to 0° F. (Optional engine coolant heater attachment will assist starting under more extreme conditions.)
- Air intake heater cold starting aid on the 2032R provides quick starts in temperatures down to
0° F. (Optional engine coolant heater attachment will assist starting under more extreme conditions.) - Auto-bleeding fuel system means there is no special bleeding required if the tractor runs out of fuel
- This system will self-prime the injection pump, lines, and injectors, providing fast fuel recovery
- Key start and shutoff eliminates fuel shutoff knob
- Electric solenoid shuts fuel supply off immediately when key is turned off
- See-through coolant recovery tank permits operator to check coolant level without removing radiator cap
- Dry-type air cleaner (1) with safety element (2) keeps dirt and other contaminants out of the engine
- Safety element (second filter) will protect engine if primary filter would develop a leak
- Protects engine when servicing primary filter
- Air cleaner service indicator is standard equipment on all models and alerts owner as to when to service the air filter
- The one-piece hood can be easily raised for full access to engine compartment
- Front grille screen and sides on one-piece hood provide excellent flow of air to the engine compartment
- Sealed radiator compartment keeps trash and debris on outside of hood
- Improved fuel fill is relocated to right side of hood allows easier refueling
- Horizontal exhaust discharges fumes away from the operator station, reducing noise and improving operator visibility and comfort.
Yanmar is a U.S.-registered trademark of Yanmar Company Limited.
The 2025R and 2032R hydrostatic (HST) Tractors feature a foot-controlled hydrostatic transmission.
-
Low pedal effort makes the transmission very easy to operate
-
Fluid under pressure transmits engine power to the drive wheels through a hydraulic pump and motor
-
The hydrostatic drive unit functions both as a clutch and transmission
Twin Touch foot controls allow selecting both speed and direction of travel with a touch of the toe. Ideally suited for jobs where productivity is a must, such as loader or mower applications.
- Infinite ground speeds, even at full throttle, to match the job
- No clutching for fast direction changes
- Faster, easier, and more precise to operate than competitive tractors with treadle pedal design (toe-heel)
Provides high torque for start up - Reduces powertrain shock loads
- Large rubber foot pedals were designed for operator comfort and allow for convenient operation of the tractor
Transmission has two speeds - hi and lo range.
- The range lever is located next to the left-hand fender (A), conveniently within reach of the operator.
Kanzaki® HST transmission is used for reliable operation.
Durability features include:
1) Large forged one-piece trunnion shaft with larger support bearings that reduce vibration and noise.
2) Innovative transaxle combines an HST transmission, gear reduction axle, and clutch.
3) Pressure side filtration allows using a finer mesh filter (10 micron) than suction filtration systems used on many competitive tractors.
4) Charge pump used to deliver oil to transmission (some competitive tractors use one pump for transmission and hydraulics).
5) Oil cooler cools transmission oil for longer transmission life.
Kanzaki is a U.S.-registered trademark of Kanzaki Kokyukoki Mfg. Company.
The operator's station has been redesigned for greater operator comfort and visibility.
-
Sloping hood design provides improved visibility
-
Plenty of room for comfortable operation
-
High-back seat with suspension
-
Retractable seat belt
-
Molded polymer foot deck design on 2025R dampens sound and vibration
-
Large, easy-to-read automotive-style instrument panel
-
Step-through operator station makes getting on and off the tractor easy
-
Fender-mounted handrails, large and easy to grab, assist the operator when getting on and off the tractor
-
Controls are on the fenders for operator convenience
-
Operator controls are color-coded for easier identification
-
Front horizontal exhaust for increased operator visibility
Operator presence system.
-
Enhanced operator presence system on the 2032R allows for simpler out-of-seat power take-off (PTO) operation; however, the engine will shut down if the operator leaves the seat when the transmission or mid-PTO is engaged. (See operator's manual for instructions.)
-
On the 2025R, if the operator leaves the tractor seat when the transmission, mid PTO, or rear PTO is engaged, the engine will shut down
Instrumentation
Full instrumentation is standard equipment for operating convenience and confidence.
Updated automotive-style instrument panel includes:
-
4-wheel drive (4WD) indicator light
-
Tach/hour meter
-
Electric fuel gauge
-
Oil pressure indicator light
-
Alternator indicator light
-
PTO engagement light
-
Park brake light
-
Flashing warning lights
-
Coolant temperature light
Suspension seat
Updated seat design offers improved back support for more comfortable operation.
Seat adjusts fore/aft for operator convenience.
Seat adjustment lever is located on the right-hand side of the seat.
Seat flips forward for protection from the elements.
One of the greatest operator concerns involves difficulty in attaching tractor implements. John Deere has addressed this issue with the iMatch Quick-Hitch.
The iMatch Quick-Hitch provides easy hookup and a guaranteed fit for all Category 1 implements designed to meet the ASAE Category 1 Standard S278.6 for quick-attach hitches.
-
All implements require a set of bushings in order for the attachment to fit and work properly with the iMatch Quick-Hitch. One set of bushings comes with the iMatch Quick-Hitch.
NOTE: In the above picture with the rotary cutter, the bushing set BW15056 is shown. These bushings allow the hooks on the iMatch and the pins on the rotary cutter to fit together properly. All other implements (box blades, tillers, rear blades, etc.) will require a set of bushings to enlarge the pin to fit with the iMatch hooks. Bushings of different lengths can be found in the parts system or through a bushing supplier (see dimensions below).
-
Upper bushing
-
Inside diameter: 1.93 to 1.96 cm (0.76 to 0.77 in.)
-
Outside diameter: 3.15 to 3.18 cm (1.24 to 1.25 in.)
-
-
Lower bushings
-
Inside diameter: 2.24 to 2.26 cm (0.88 to 0.89 in.)
-
Outside diameter: 3.63 to 3.66 cm (1.43 to 1.44 in.)
-
iMatch Quick-Hitch dimensions
iMatch Quick-Hitch implement geometry
iMatch AutoHitch is the next generation of the successful iMatch Quick-Hitch that allows operators to hook up the PTO shaft of certain PTO-driven implements. This revolutionary system is the first of its kind, allowing the operator to change from a compatible rotary cutter to a compatible rotary tiller without leaving the seat of the tractor.
John Deere continues to lead the way with innovative designs that ensure operators can quickly and easily change implements and attachments on the compact utility tractors with no tools and little experience needed.
Specs & Compare
Key Specs | 2025R Current Model |
Engine power (gross) | SAE J1995 rated power: 17.8 kW 23.9 hp 24.2 PS at 3200 rpm |
Power take-off (PTO) power | 12.8 kW 17.2 hp |
Steering hydraulics | 13.4 L/min 3.5 gpm |
Implement hydraulics | 13.4 L/min 3.5 gpm |
Hitch type | Limited Category 1 |
Lift capacity, 24-in. behind link arms | 415 kg 915 lb |
Standard transmission; forward/reverse | Hydrostatic - two range |
Cruise control | Standard |
Approximate shipping weight (open-station; cab) | Open station: 849 kg 1872 lb Cab: 1085 kg 2392 lb |
Wheelbase | 1600 mm 63 in. |
Engine | |
Family | |
Manufacturer | Yanmar® |
Engine model | 3TNV80F-NCJT |
Engine power (gross) | SAE J1995 rated power: 17.8 kW 23.9 hp 24.2 PS at 3200 rpm |
Power take-off (PTO) power | 12.8 kW 17.2 hp |
Rated engine speed | 3200 rpm |
Type | Diesel |
Injection pump type | Indirect injection |
Aspiration | Natural |
Emissions compliance | Final Tier 4 |
Cylinders/displacement | Three cylinders: 1.267 L 77 cu in. |
Number of cylinders | Three |
Cylinder liners | Cast-in-block |
Bore and stroke | 80 x 84 mm 3.2 x 3.3 in. |
Compression ratio | 23.1:01 |
Lubrication | Pressurized |
Cooling system | Water pump |
Air cleaner | Dual element |
Engine torque at rated speed | 53.1 Nm 39.1 lb-ft |
Fuel tank capacity | 20.4 L 5.39 gal. |
Electrical | |
Battery size | 500 CCA |
Alternator (12-V) | 40 amp |
Starter size | 1.2 kW 1.6 hp |
Fuel system | |
Type | Indirect injection |
Fuel consumption | |
Transmission | |
Standard transmission; forward/reverse | Hydrostatic - two range |
Optional transmission; forward/reverse | |
Left-hand reverser | No |
Transmission gear ranges | |
Final drive | Spur gear |
Brakes | Wet disc |
Steering | Power steering |
Clutch, wet/dry | |
Clutch disk diameter wet clutch | |
Axle capacity | Front 612 kg 1349 lb Rear 1100 kg 2425 lb |
Creeper | No |
Cruise control | Standard |
Differential lock | Yes |
Drawbar maximum vertical load | |
Hydraulics | |
Type | Open center |
Pump rated output | Steering 13.25 L/min 3.5 gpm Implement 13.25 L/min 3.5 gpm 26.5 L/min 7.0 gpm |
Pump type | Gear |
Maximum operating pressure | 137 bar 1987 psi |
Draft control sensing | Position control |
Remote control valves available | Two |
3-point hitch | |
Type | Limited Category 1 |
Lift capacity, 24-in. behind link arms | 415 kg 915 lb |
Power take-off (PTO) | |
Standard | Rear - 540 rpm Mid - 2100 rpm |
Optional | |
Control | Independent |
Clutch | Wet disk |
Brake (for mid and rear PTO) | Wet disk |
Engagement method | |
Fluid capacities | |
Crankcase with filter | 2.7 L 2.9 gal. |
Transmission and hydraulic system | |
Final drive | |
Type | Spur gear |
Differential lock | Yes |
Operator station | |
Rollover protective structure | Type Foldable OSHA, SAE, ASAE |
Platform - flat/straddle | Three-piece semi flat |
Gear shift location - console/floor | Left-hand side |
Cab | |
Compliance | |
Visibility | |
Air conditioning, temperature differential | |
Doors | |
Noise rating | |
Seat equipment | |
Dimensions | |
Height | |
Wheelbase | 1600 mm 63 in. |
Front axle clearance | |
Turning radius with brakes | |
Turning radius without brakes | Outside front tire: 2.51 m 8.2 ft |
Limited slip differential | No |
Approximate shipping weight (open-station; cab) | Open station: 849 kg 1872 lb Cab: 1085 kg 2392 lb |
Tires | |
Front | R3 Turf: 23x8.50-12 R3 Radial: 220/55-R12 R4 Industrial: 23x8.50-12 |
Rear | R3 Turf: 12-16.5 R3 Radial: 280/70 R16 R4 Industrial: 12-16.5 |
Front tread range | |
Rear tread spacing | |
Miscellaneous | |
Toolbox | Yes |
Tilt steering wheel | Yes |
12-V Outlet | Yes |
Additional information | |
Offers & Discounts
Reviews
Location: Warren Texas
Length of Ownership: 1yearOrLonger
Usage: Weekly
I purchased my 2025r in Beaumont Texas and is cheaply built
Location: Indiana
Length of Ownership: 1month
Usage: Daily
I recently traded my 2010 JD 2320 with a 62" drive over mower deck for a 2021 JD 2025R with a 60" auto-connect mower deck. I ordered this tractor and when it arrived this was sure a disappointment. The 2025R just seems cheap!! For example the individual brakes have been reduced to a single brake pedal, the drawbar has been replaced by a plate with a hole in it, the light that indicates that the 4WD is engaged no longer exists, the levers to shift the pto and hi and lo for the transmission seem very flimsy compared to the old solid levers, the rollbar no longer folds down out of the way, instead it folds down just enough to walk right in to it with your forehead when you try to walk behind the tractor and finally the pedal to lock the differential is just a rod that only sticks out about an inch. I was told by my salesman that there is an aftermarket pedal you can get for the diff lock. When I ordered this tractor I did not see the new models, but I went with 2025r Instead a 1025r because I didn't want to go backwards, but compared to my 2320 it doesn't seem to live up to the standards. I was told that the 2320 was made by Yanmar for John Deere and that the 2025R is made directly by John Deere this is probably the most disappointing part!!
Location: Grand Rapids Michigan
Length of Ownership: 1month
Usage: Daily
I bought this tractor a month ago and traded in a 1025r it feels like more tractor and I love it very useful and works hard
Location: SE Wisconsin
Length of Ownership: 1month
Usage: Monthly
Very powerful little machine, it's great for getting into small places but is happy in wide open spaces as well.
Location: Blissfield, MI
Length of Ownership: 3months
Usage: Daily
I bought the 2025R a few months back to help with my bad back. It's exceeded my expectations. We added forks, a rototiller, and post hole digger and now can do nearly anything we want. We've also used the tractor to do things that we never even thought about. While I wouldn't hesitate to buy again, I'd probably go with the smaller 1025R. While the 2025R is more stabile and comfortable for me, the 1025R would fit into smaller spaces.
Location: Washington NC
Length of Ownership: 6months
Usage: Weekly
I’ve had the 2025 Tractor for about 5 months and I love it, has plenty of power and works hard, but has couple of things that can be improved: Seat Suspension needed for harsh ride, and needs a guide on the mower deck front attachment for when removing and installing deck with loader on tractor.
Location: Mississippi Gulf Coast
Length of Ownership: 3months
Usage: Monthly
I have owned the tractor for a few months. Already cleared a fence line, dug a drainage ditch, and mowed my creek property. Work perfectly.
Location:
Length of Ownership: 6months
Usage: Daily
i have a 2019 2025R with loader, backhoe, 54D mower, rear Frontier blower and other non-Deere implements. It is used on our large forested property for all types of regular (mowing, snow) and periodic (box blading, digging, etc.) tasks. Perfect machine for our size property and usage pattern. While the 1025R is similar and very capable, the tire size, height, clearance, weight, ground speed, and stability differences more than justify this machine in my opinion. With tractors, more power and size is almost always better but I have found you need to buy for your expected usage and realistic "peak" uses to avoid buyers remorse. I have read about many upgrades created by just slightly underbuying. This particular tractor feels like and for me is one that allowed me to feel very satisfied without looking up at the larger frame 2-series or entry 3-series with tractor envy. This is a very capable and relatively affordable machine.
Location: Olalla, WA
Length of Ownership: 3months
Usage: Weekly
This compact tractor and backhoe is the perfect size for my wife and I to operate and maneuver around our little place. The manual thumb of the backhoe is a MUST HAVE!!!
Location: Bloomer, WI
Length of Ownership: 1yearOrLonger
Usage: Weekly
We live on 35 acres with 30 of it rented to a local farmer. Originally purchased a 1025R, but it was just a little to small for what I was doing. The 2025 fits the bill perfectly.
Videos
WE'RE HERE TO HELP.
- CHECK our videos below. Looking for something else?
- DROP us a line for all inquiries. >>>